Hand-held-products Dolphin 7200 User Manual download pdf (Page 28)

3 - 10 Dolphin® 7200 User’s Guide

Resetting the Dolphin Terminal

Under normal circumstances, you should not need to reset the Dolphin terminal. However, if required, you can reset the terminal

with one of the following methods:

1. Perform the Three Key Reset.

The Dolphin terminal can be reset by pressing and releasing the SHIFT, ON/SCAN and BKSP keys. All three keys must be

held down and released at the same time.

2. Press the Reset Switch.

The reset switch is located in the battery compartment of the Dolphin terminal.

Use the tip of an unfolded paper clip (or other similar blunt object) to gently press the reset switch.

The recess hole for the reset switch may be covered with a small plastic cover. This cover must be removed and placed back

in position after accessing the reset switch.

3. Remove the main battery.

If the methods described above are not successful, the Dolphin terminal may be reset by removing the main battery for an

extended period of time. The terminal will reset when the Dolphin's internal backup battery is completely drained of power. This

process may take up to 5 hours.

Reset

Switch

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 113 114

No comments

Hand-held-products Dolphin 7200 User Manual Page 28